# Investigation into Stress Capacity This physics experiment was conducted to investigate stress capacity or known as tensile strength. We had to determine the relationship between the force applied on an object and the extension of the elastic material. The link between the force applied and the extension of the spring is governed by Hooke’s Law. To establish this connection, we need to measure the relationship between the force applied and the extension. We did this by adding a series of masses, which builds the force on the spring (The Professor, 2016). Hooke’s Law: When an elastic object is stretched, the expanded length is called extension. The extension of the elastic object is directly proportional to the force applied to it also known as F=kx. F is Force and expressed in Newtons (N). k is the spring constant expressed in newtons per metre (N/m) x is the extension expressed in metres (m). (BBC Bitesize, 2016) A force causes an object to undergo changes, forces that are unbalanced change speed, shape or direction. Gravitational forces are only in effect if there are two or more masses while friction opposes motion (BBC Bitesize,2017). Forces that affected this experiment are: Gravitational Force, Applied Force, Tensional Force. Gravitational Force: A force of attraction between all objects, it depends on the masses of the object and the distance between them. The larger object, the stronger the gravitational force. Applied Force: A force when an object is being pushed or pulled by another object. Applied forces causes an object to undergo changes in acceleration, velocity and direction. The force equation is F=ma. Tensional Force: It is a force that is transmitted through a string, cable, elastic band, rope or a wire. Tensional force is directed along the length of the object when it is pulled by forces from opposite ends. The relationship between stress and strain is known as the stress-strain curve. It is different for each material and is found by recording the amount of deformation at distinct intervals of tensile or compressive loading. Strain is relative change in shape or size of an object due to externally applied forces. This means it becomes dimensionless and has no units. Stress is the internal force (per unit area) associated with strain. It is predicted that the two materials will show different conclusions. I believe that the silicon tube has higher capability of holding larger masses. It depends on the length and thickness of the material. The prediction is that the silicon tube will have the highest stress capacity and won’t have a long extension while the elastic band will stretch the furthest but won’s have much stress capacity. Equipment Retort Stand Clamp 1 Metre Ruler Mass Hanger Silicon Tube Elastic Band 50g and 100g Masses Notebook and Pen Procedure Setup Retort stand and clamp. To start with, place the material/object on without any stress. Measure the weight of the mass hanger. Measure the length of the material/object. Place mass on it and measure the length to figure out extension Record results on table Repeat step 5, three times for each weight to allow results to be reliable then find average. Keep repeating step 5,6,7 until enough data has been recorded for each material Milan Abraham Elastic Band Mass (kg) Force Original Length 1st Extension 2nd Extension 3rd Extension Average 0 0 14.9 0.061 0.60N 14.9 +1.1 (16) +0.9 (15.8) +1 (15.9) +1 (15.9) 0.161 1.58N 14.9 +1.5 (16.4) +1.4 (16.3) +1.5 (16.4) +1.5 (16.4) 0.261 2.56N 14.9 +1.8 (16.7) +1.7 (16.6) +1.9 (16.8) +1.8 (16.7) 0.361 3.54N 14.9 +2.1 (17) +2 (16.9) +2.2 (17.1) +2.1 (17) 0.461 4.52N 14.9 +2.4 (17.3) +2.3 (17.2) +2.6 (17.5) +2.4 (17.3) 0.561 5.50N 14.9 +2.9 (17.8) +2.9 (17.8) +2.7 (17.6) +2.8 (17.7) Milan Abraham Silicon Tube Mass (kg) Force Original Length 1st Extension 2nd Extension 3rd Extension Average 0 0 72.2 0.061 0.60N 72.2 +2.3 (74.5) +2.3 (74.5) +2.8 (75) +2.5 (74.7) 0.161 1.58N 72.2 +4.3 (76.5) +4.3 (76.5) +4.3 (76.5) +4.3 (76.5) 0.261 2.56N 72.2 +5.3 (77.5) +6.3 (78.5) +5.8 (78) +5.8 (78) 0.361 3.54N 72.2 +7.8 (80) +7.8 (80) +8.3 (80.5) +8 (80.2) 0.461 4.52N 72.2 +8.8 (81) +8.3 (80.5) +8.8 (81) +8.6 (80.8) 0.561 5.50N 72.2 +10.3 (82.5) +9.8 (82) +9.8 (82) +10 (82.2) 0.98 1.4 0.7 The Elastic band and Silicon tube was hung vertically with a mass hanger to the end of the material. Masses from 61g to 561g were added. The length of the elastic band was measured once it was at rest. In this structure, certain forces were in effect. Gravitational force directed the hanging masses downwards. The Applied Force in this case is the masses pushes the elastic material downwards with gravity supporting it.  Restoring Force directs the elastic material upwards, in the opposite direction of displacement. Tension is directed through each material pulling each end. Using Newton’s Law the spring constant was calculated for each material. F=ma was transferred into W=mg to calculate gravity. To find the spring constant for the elastic band, mass was turned into dynes. Gravity times mass= dynes. 9836.07 times 0.561 = 5518.04 dynes. Then it is dynes divided by extension(cm) which is 5518.07 divided by 2.8 = 1970.74 dynes/cm which is 1.97N/m. The spring constant for the silicon tube was which is 0.55N/m. The intercept for the best fit straight line is close to the origin and is also consistent with Hooke’s Law. To minimise errors, we should have viewed the ruler from specific angles to make sure it was vertical. The scale should be viewed at eye level to avoid parallax error. There were some issues with the retort stand so some equipment was not fit for the experiment and were faulty. In some instances, we needed to make sure that when the person was adding mass, he didn’t stretch the material while he was doing it so the results could be accurate. We reduced the decimal places to two so that results could be easy to substitute while being accurate. The hypothesis was predicted to be that the elastic band while have a longer extension than the silicon tube and the silicon tube would be stronger than the elastic band. The prediction wasn’t correct as from results it says that silicon tube had a bigger extension which was a surprising result as the material was much thicker. The elastic band had the best result because it showed results that were somewhat predicted and accurate. Through this experiment investigated stress capacity, Hooke’s Law and certain forces which have influenced the experiment. The hypothesis wasn’t as predicted. For this experiment, we determine the spring constant and Young’s Module, we had to interpret the behaviour of two different materials. The results will be analysed to determine what is happening to the materials physically and which one is more capable of the masses. The two types of materials used for this experiment were an elastic band and a tube of silicon rubber.

## Order a Unique Copy of this Paper

Essay Creek is an academic writing service provided to you by, a London-based company.

• Experience
Helping students successfully for 11 years.
• Confidentiality & Security
Be sure your information will be kept confidential due to our secure service.
• Quality & Reliability
8.5 out of 10 average quality score according to our customers' feedback. 97.45% of orders delivered on time.
• Versatility
478 active writers in 68 disciplines.
• 100% money back guarantee
You can always request a refund if you are not satisfied with the result.

Read more about us

Our team of writers is comprised of people with necessary academic writing skills and experience in various fields of study.

• Skilled writers only
We carefully choose writers to employ, paying attention to their skills and abilities.
• Competence
Your order will be assigned to a competent writer who specializes in your field of study.
• In-depth knowledge
Our writers know both peculiarities of academic writing and paper formatting rules.
• Motivation
We keep updated on results our writers show, motivating them to constantly improve their performance.

Read more about our writers

• Testimonials
Our clients' testimonials prove we're doing everything right.

Check for yourself

• Sample essays
The best way to understand how well our writers do their work is to view sample essays written by them.

View samples

• Our Free Essay Tools
Even more opportunities to improve your academic papers.